Rrp Bearing Press Adaptor Kits 698 2rs Kit 2

  Adaptor Kits only see other listings for RRP bearing press to use with these kitsSee Size guide for kit DetailsThe Bearing Press and Extraction Tool BPET is designed for the ‘Home Mechanic’ for use on ‘LINKAGE BEARINGS’ however it still works on many pivot and hub bearings adaptors and kits are being developed for hubs and pivot bearing useInstructions for UseFirstly ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract see list below. You can identify which kit you need either by reading the bearing number written on the rubber seal or you can measure the inner bore race and outer race of the bearing as shown below and match it to our list belowExtracting Bearings RED adaptors – SOLD SEPARATELYPlace the RED adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.Wind on the main handle until the parts all come together make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction* it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuingInserting Bearings BLUE adaptors – SOLD SEPARATELYPlace the BLUE adaptors from your RRP BEARING KIT as shown below take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.Wind on the main handle until all the parts come together the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle the male adaptor will press onto the outer race of the bearing and insert it NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion* it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing

Use the ‘More info’ button above to see better images and details

Product GTIN: 00609613969461