Peaty`s Monarch Grip Lock Ring Red

The Peaty's Monarch Lockrings are made from 6061 aluminium have a slimline 8mm wide clamp and are secured with 3mm stainless steel bolts so you don’t need to worry about stripped or rusted heads. They have laser etched logos and an orientated Peaty’s logo on the grip end help you position the grip offset correctly while letting other riders know you’re ready to rule the trail Peaty’s style. KEY PRODUCT FEATURES Two lockrings with 3mm allen key bolts Slimline 8mm wide clamp to maximise grip area Made from 6061 aluminium with stainless steel bolts Available in 12 colour options Left / Right markings on each clamp Cardboard only backing board with paper locking wire Fitting instructions Loosen 3mm allen key on lockring. Remove monarch grips from bars and pull off old lockrings. Re-fit new clamps ensuring the correct side is fitted to the correct grip using the l and r markings engraved above the allen key. When fitted correctly the flat edge of the lockring should touch the rubber of the grip and allenkey facing the rider. Re-fit grips following our grip application steps. Ride!

Use the ‘More info’ button above to see better images and details

Product GTIN: